Explanation of the loom type letters and numbers:
T = loom suitable for weaving technical fabrics
2N = weft insertion system with 2 band rapiers, controlled and driven by servomotors by guide hooks
4E = number of mounted slay driving cam groups
P = heavy loom supporting structure
6000 = weaving width (on request be possible all weaving width)
TECHNICAL FEATURE OF THE LOOM
- 8 Colors Weft Position Change, driven by Servomotors;
- Max. weaving width 6000 mm (on request be possible all weaving width)
- Min. weaving width 2000 mm
- Adjustment of the fabric by both sides mm. 2000
- Weaving speed adjustable from 5 up to 140 rpm
- Beat-up power max. 2500 N/m
- number of the yarns for cm. Min. 5 – max. 200;
- weft wire diameter min. mm. 0,15 – max. mm. 0,60.
- n. 2 let off with 4 warp beams, driven by servomotors
- n. 3 roller take up, regulation of the center roller by PC
- Possibile to use full temple (Trinca patented) or lateral temple
- ELECTRONIC, ROTARY DOBBY TRINCA TYPE R.E.R
Dobby type explanation:
R = Dobby
E = Electronically controlled
R = Rotary
Suitable for driving from 2 to 52 heddle frames complete with: dobby driven and controlled by the PC;
- possibility of weaving with open shed and closed shed;
- possibility to put the heddle frames onto its “0” point;
- possibility to control and adjust manually each single frame;
- possibility to adjust the frame position as needed by each fabric pattern and function of frames in the upper or in the lower part;
- possibility of the frame standstill adjustments;
- possibility of the frame phase adjustment;
- fabric Multipatern.
LOOM CONTROL DEVICE:
The complete loom control, all data settings and operating function adjustments are carried out by the TRINCA electronic control device and the especially developed TRINCA loom managing. All electronically and electric control devices are installed inside the main switchboard and all data’s, as well as loom driving and control functions, are developed by an industrial PC with software windows CE.